Standard Test Method – Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment
standard by National Association of Corrosion Engineers, 01/01/1988

Standard Recommended Practice – Internal Cathodic Protection Systems in Oil-Treating Vessels
standard by National Association of Corrosion Engineers, 10/15/2001

Standard Test Method for Measuring Deposit Mass Loading (Deposit Weight Density) Values for Boiler Tubes by the Glass-Bead-Blasting Technique
standard by National Association of Corrosion Engineers, 04/24/1999

Standard Test Method – Holiday Detection of Internal Tubular Coatings of Less Than 250, um (10 mils) Dry Film Thickness
standard by National Association of Corrosion Engineers, 10/01/2002

Standard Recommended Practice – Field Measurement of Surface Profile of Abrasive Blast Cleaned Steel Surfaces Using a Replica Tape
standard by National Association of Corrosion Engineers, 10/01/2002

Rubber Linings for Abrasion and Corrosion Service
standard by National Association of Corrosion Engineers, 10/26/1998

Electrochemical Realkalization and Chloride Extraction for Reinforced Concrete
standard by National Association of Corrosion Engineers, 03/10/2007

Cathodic Protection of Prestressed Concrete Cylinder Pipelines
standard by National Association of Corrosion Engineers, 01/14/2000

Screening Test for Evaluating the Effectiveness of Gypsum Scale Removers
standard by National Association of Corrosion Engineers, 10/11/1997

Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping
standard by National Association of Corrosion Engineers, 11/14/2003

Slow Strain Rate Test Method for Screening Corrosion Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service
standard by National Association of Corrosion Engineers, 02/12/2004

Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts
standard by National Association of Corrosion Engineers, 08/19/2010