Standard Material Requirements – Methods for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments
standard by National Association of Corrosion Engineers, 01/17/2003
Standard Terminology and Acronyms Relating to Corrosion
standard by National Association of Corrosion Engineers, 09/01/2011
Standard Recommended Practice – Pilot-Scale Evaluation of Corrosion and Fouling Control Additives for Open Recirculating Cooling Recirculating Cooling
standard by National Association of Corrosion Engineers, 01/17/2003
Standard Recommended Practice – Monitoring Corrosion in Oil and Gas Production with Iron Counts
standard by National Association of Corrosion Engineers, 12/01/1998
Screening Test for Evaluating the Effectiveness of Gypsum Scale Removers
standard by National Association of Corrosion Engineers, 01/01/2002
Standard Recommended Practice – Fabrication Details, Surface Finish Requirements and Proper Design Considerations for Tanks and Vessels to be Lined for Immersion Service
standard by National Association of Corrosion Engineers, 09/01/1995
Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Above 100 degrees C
standard by National Association of Corrosion Engineers, 03/27/1998
Pilot Scale Evaluation of Corrosion and Scale Control Additives for Open Recirculating Cooling Water Systems
standard by National Association of Corrosion Engineers, 06/16/2000
Standard Recommended Practice – Metallurgical and Inspection Requirements for Cast Sacrificial Anodes for Offshore Applications
standard by National Association of Corrosion Engineers, 06/24/1999
Standard Test Method – Field Monitoring of Bacterial Growth in Oilfield Systems
standard by National Association of Corrosion Engineers, 01/01/1994
Evaluating the Compatibility of FRP Pipe and Tubulars with Oilfield Environments
standard by National Association of Corrosion Engineers, 03/27/1998
Standard Practice – Corrosion Control of sucker Rods by Chemical treatment
standard by National Association of Corrosion Engineers, 03/11/2007