Core, Flexible Honeycomb, Aluminum Alloy, Treated for Sandwich Construction 5052, 350 Fahrenheit (177 Celsius)
standard by SAE International, 07/07/2021

Aluminum Alloy, Extrusions 0.68Mg – 0.40Si (6063-T6) Solution and Precipitation Heat Treated
standard by SAE International, 06/10/2021

Equivalence of Equipment Environmental Qualification Standards for Civil and Military Aircraft Equipment
standard by SAE International, 06/22/2021

Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu – 1.5Mg – 0.60Mn (Clad One Side 2024-O) Annealed
standard by SAE International, 10/15/2021

Handbook of Hydraulic Metric Calculations
standard by SAE International, 05/18/2021

Steel Bars, Wire, Forgings and Forging Stock, Mechanical Tubing, Rings, and Extrusions, Corrosion-Resistant 11.8Cr – 2.5Ni – 1.8Mo – 0.33V (0.08 – 0.15C) Annealed, Vacuum Arc or Electroslag Remelted
standard by SAE International, 05/18/2021

Silver Alloy, Brazing Filler Metal 60Ag – 30Cu – 10Sn 1115 to 1325 ¿¿F (602 to 718 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 09/01/2021

Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr – 6.5Ni – 0.75Mo – 0.60Cb – 1.5Cu Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 07/23/2021

Defining and Measuring Factors Affecting Helicopter Turbine Engine Power Available
standard by SAE International, 10/01/2021

Elastomer: Nitrile Rubber (NBR) Synthetic Oil Resistant Sheets, 65 to 75 Type A Hardness for Products in Engine Oil Systems
standard by SAE International, 10/22/2021

Low-Alloy Steel, Heat-Resistant, Bars, Forgings, Mechanical Tubing, and Forging Stock 0.95Cr – 0.55Mo – 0.30V (0.40 – 0.50C)
standard by SAE International, 10/22/2021

Aluminum Alloy, Clad One Side Sheet 0.6Mg – 0.35Si – 0.28Cu (No. 23 Brazing Sheet) As Fabricated
standard by SAE International, 07/07/2021